User Manual

TOOLS PANEL

Iris 2 | SPECTROGRAM MENU Page 43

SPECTROGRAM MENU

Right-clicking on the spectrogram (or any of the

pool selectors) brings up a menu of additional

options to help with your workﬂow:

Copy/Paste Sample: Quickly copy and paste

samples across the sample pools.

Copy/Paste Sample and Selection: Copy and

paste both the sample and any selections

you have made on the spectrogram. Because

spectrogram selections are made across time

relative to the sample itself, selections cannot

be copied without also copying the sample

they refer to. However, you can apply a similar

selection to a dierent sample by using this

menu option, then simply replacing the sample

after completing the action.

Copy/Paste Parameters: Copy and paste all the parameters applied to the sample

(like tuning, pan, gain, send eects, and all modulation assignments and amounts)

without copying the sample itself or any Spectral Filter selections.

Copy All: Copy and paste all parameters as well as the sample and Spectral Filter selections.

Load Sample: Open an OS browser to import a new sample into the given pool.

Clear Sample: Remove the current sample from the pool.

Set Loop Points to Selection: Automatically bring loop points within the furthest boundaries

of any Spectral Filter selection you have made.

Set Auto-detected Root Note: After making a Spectral Filter Selection, the fundamental

pitch of the sample may change. Root Note can be detected and automatically reset after a

selection has been made by using this option.