User Manual

Sample Panel

The Sample Panel is one of four collapsible panels in the main Iris 2 UI. Four

versions of the Sample Panel also appear as part of the Mix Window: one for

each sample pool.

SAMPLE LOADING

The sample view contains important controls for loading and manipulating

each sample. At the very top is the Sample File Display which displays the

name of the loaded sample. If there is nothing listed in this area, it means

there is no sample currently loaded. Clicking on the Sample File Display

will open a Sample Browser where you can preview and select a sample

or oscillator waveform to load. If you would prefer to load a sample using a

standard OS browser, you can access one by clicking on the folder to the

right of the ﬁle name, or you can always just drag an audio ﬁle directly into the

Spectrogram area. The up/down arrows between the display and the folder

icon let you scroll up and down through samples located in your current folder.

For instance: If you’re in the oscillator waveform folder labeled “05-Pulse,” you

could scroll up and down using these arrows, trying out each Pulse waveform

until you ﬁnd one you like. If you have a sample loaded, you can ﬁnd its

complete local path by hovering your cursor over the ﬁle name.