User Manual

SAMPLES

Iris 2 | CLEAR A SAMPLE Page 20

Samples and OSC WAVs can be loaded in a multitude of ways:

1. From the Full Browser, you can:

♦ Preview and select a sample or OSC WAV, then simply drag it to one of the areas

labeled “Sample 1,” “Sample 2,” etc.

♦ Click one of the Load buttons below each Sample section to open an OS

browser to use any .WAV or .AIF ﬁle on your computer.

2. From the Sample panel, you can:

♦ Click on the Sample File Name at the top of the Sample Panel to open a Sample

Browser where you can preview and select a sample or OSC WAV. Double-click

to load it.

♦ Click on the folder next to the Sample File Name to open an OS browser to use

any .WAV or .AIF ﬁle on your computer.

3. From the spectrogram area, you can:

♦ Preview and select a sample or OSC WAV from the embedded browser in an

empty spectrogram. Double-click to load it.

♦ Drag a .WAV or .AIF ﬁle directly onto the Spectrogram area.

♦ Double-click on the empty spectrogram area to load a sample using an OS

browser.

♦ Right-click on an empty or populated spectrogram, or pool selector button,

and from the context menu click “Load Sample” to ﬁnd a sample using an OS

browser.

When replacing a sample that has a Spectral Filter selection made to it, you can choose to

have selections remain for the new sample, or to have samples cleared out when the new

samples load. This option is in the Options Menu.

CLEAR A SAMPLE

Clearing a sample will remove the sample itself and any Spectral Filter selections that have

been made. To clear a sample from a Spectrogram, you can:

1. Press the Clear Sample button in the Sample Panel.

2. Right-click on a spectrogram or pool selector button, and from the context

menu click “Clear Sample.”