Manualshelf

User Manual

ManualsBrandsiZotope ManualsAudio SoftwareIris 2 - PLUG-IN VIRTUAL SYNTHESIZER
12345678910
INTRODUCTION
Iris 2 | TRIAL VS. DEMO MODE Page 7
Copyright © 2014 iZotope, Inc. All rights reserved.
TRIAL VS. DEMO MODE
For 10 days after you first open Iris 2 as a plug-in or standalone application, it will run in
Trial Mode, which oers full functionality. After 10 days, Iris 2 will revert to Demo mode. In
Demo mode, Iris 2 will periodically mute audio output.
AUTHORIZING YOUR COPY OF IRIS 2 ONLINE
After opening Iris 2 and launching the Authorization Wizard, the following steps will
complete the authorization process online:
1. Enter the serial number e-mailed to you or contained in the Iris 2 box you
purchased. It should look like this: SN-IRIS2-XXXX-XXXX-XXXX-XXXX
2. You must also enter your name and a valid e-mail address. Make note of
the e-mail address you use to authorize your license. Your license and
iZotope account will be linked directly to this e-mail address. When you have
confirmed that your serial number and e-mail information are accurate, click
“Authorize.”
3. Lastly, click “Submit” to send your authorization message to the iZotope
servers. If the authorization is accepted, click “Finish” button to complete the
authorization.
AUTHORIZING YOUR COPY OF IRIS 2 TO A
PORTABLE DRIVE
If you frequently move between dierent computers, or keep your audio workstation
oine, you may want to keep your Iris 2 authorization on a portable hard drive or flash
drive. After opening Iris 2 and launching the Authorization Wizard, the following steps will
complete the authorization process:
1. Enter the serial number e-mailed to you or contained in the Iris 2 box you
purchased. It should look like this: SN-IRIS2-XXXX-XXXX-XXXX-XXXX
2. You must also enter your name and a valid e-mail address. Make note of the
e-mail address you use to authorize your license. Your license and iZotope
account will be linked directly to this e-mail address.
3. Make sure the portable drive you will to store the authorization on is plugged
in, mounted, and formatted.
4. Click “Advanced” and choose “Store response on disk,” then choose the
desired disk in the list on the left.