Manual

8
Use the Security Lock Provided with your Semi-auto shotgun
This semi-auto shotgun comes with a security lock to assist in protecting against
unauthorized use. See Figure 1. The semi-auto shotgun must be unloaded
when the security lock is in place. WARNING: Using the security lock cannot
substitute for securing your firearm and ammunition in separate, locked locations.
The security lock operates as follows:
1. To open the Trigger Lock
put the Key into the
notches of the Trigger
Lock Nut and unscrew it
counter-clockwise. See
Figure 2. Remove the
Trigger Lock Screw.
2. To install the Trigger
Lock on a semi-auto
shotgun put the Trigger
Lock over the trigger
guard with the smaller
end of the Trigger Lock
shroud pointing toward
the muzzle. Then place
the Trigger Lock Screw
through the cross-slotted hole on the side of the
Trigger Lock shroud. See Figures 3a, 3b.
3. Screw the Trigger Lock Nut on the Trigger Lock
Screw (clockwise) and tighten the nut with the
key. DO NOT TIGHTEN THE NUT TOO TIGHT
OR YOU COULD DAMAGE THE LOCK SCREW.
See Figure 4.
4. To remove the Trigger Lock, unscrew the Trigger
Lock Nut counter-clockwise with the key and
detach the Trigger Lock Screw. See Figure 5.
W A R N I N G
Always store the key to the security lock: (1) in a
separate location away from the semi-auto shotgun;
(2) in a secure location unknown and not accessible to others, especially children.
Whether you secure your firearms by using the supplied security lock, a gun lock
or safe or some other mechanism, it is YOUR RESPONSIBILITY to store your
firearms in such a manner that children and other unauthorized persons cannot
gain access to them.
Figure 1
Figure 2
Figure 3a
Figure 3b
Figure 4
Figure 5