Owner's Manual

CO2 tank, remove the 12-gram CO2 adapter and screw in the adapter for the

larger CO2 tank. Insert the 88-gram CO2 tank into the adapter until you hear a

hissing sound. The gun is now pressurized. (21-22)

Put the loaded and pressurized mag back into the gun and plug the cord into

the forearm. (23-24)

SAFETY

On the left side of the receiver

is an on-o switch that functions

like a safety. It has a ON and OFF

settings. ON allows the gun to

re. OFF disconnects the battery-

operated switches (read those

sections elsewhere in this manual).

The cable from the magazine must

be plugged into the forearm of the

gun in order for the gun to re.

MODES

Both guns have the same

switches for ring modes: semi-

auto, 3-round full-auto burst and

6-round full-auto burst.

On the left side of the receiver,

there is a switch that has three (3)

settings: 1, 3 and 6. To re one

round, push the switch to “1.” This

is the semi-auto mode. Each pull

of the trigger will shoot one BB. If

you push the switch to “3” or “6,”

the gun will be in full-auto burst

mode. Either three or six BBs will

be shot with each pull of the trigger. (26)

21 22