Manual

11
Optional Magazine Release: If your CM2 has a
magazine the release it is located forward of the
magazine well on the bottom side of the rifle and is a
push button system. You move the release forward
to disengage the magazine. The release allows you
to remove the magazine from the rifle or locks the
magazine in place once the magazine has been in-
serted into the rifle (See Fig 5).
Cocking Indicator: Protrudes out behind the bolt
when the firing mechanism is cocked or is inside the
bolt when the gun is un-cocked. See Fig 6a (Rifle
action cocked), Fig 6b (Rifle action uncocked)
W A R N I N G
The cocking indicator is merely an aid to help you
confirm when hunting or shooting that your rifle is
cocked and ready-to-fire. NEVER rely on the status
of the cocking indicator to justify careless handling of
your shotgun. The cocking indicator may be broken
or obscured. Always handle your rifle as if it were
loaded, cocked and ready-to-fire.
Directions For Assembly Of Bolt Action Rifle:
1) Remove protective wrapping from rifle, with gun
pointed in a safe direction open bolt to assure the
action is empty and free of debree.
2) Open bolt (See Fig 3).
3) Clean gun and run cleaning rod down barrel to
assure that barrel and action is free of debris.
4) Close the bolt and engage the safety
(See Fig 7).
To Load Bolt Action Rifle:
1) Make sure the Bolt Action Rifle is pointed in safe
direction at all times, the safety is engaged, and never
allow fingers or objects to contact trigger during load-
ing.
2) If the rifle has the optional detachable magazine,
remove magazine and load ammunition, make sure
the ammunition is the type that is marked on the gun
(See Fig 9).
Figure 5
Figure 6a
Figure 6b
Figure 9
Figure 7
Figure 3