Manual

Use the Security Lock Provided with your Shotgun
This shotgun comes with a security lock to assist in
protecting against unauthorized use. See Picture
A. The shotgun must be unloaded when the security
lock is in place on the shotgun. WARNING: Using
the security lock cannot substitute for securing your
firearm and ammunition in separate, locked locations.
The security lock operates as follows:
1. To open the Trigger
Lock put the Key into
the notches of the
Trigger Lock Nut and
unscrew it counter-
clockwise. See
Figures 1 and 2.
Remove the Trigger Lock Screw.
2. To install the Trigger Lock on a side-by-side
shotgun put the Trigger Lock over the trigger guard
with the larger end of the Trigger Lock shroud
pointing toward the muzzle. Then place the
Trigger Lock Screw through the cross-slotted
hole on the side of the Trigger Lock shroud. See
Figure 3.
3. Screw the Trigger Lock Nut on the Trigger Lock
Screw (clockwise) and tighten the nut with the
key. DO NOT TIGHTEN THE NUT TOO TIGHT
OR YOU COULD DAMAGE THE LOCK SCREW.
See Figure 4.
4. To remove the Trigger Lock, unscrew the Trigger
Lock Nut with the key and detach the Trigger
Lock Screw. See Figure 5.
W A R N I N G
Always store the key to the security lock: (1) in a
separate location away from the shotgun; (2) in a
secure location unknown and not accessible to
others, especially children. Whether you secure your
firearms by using the supplied security lock, a gun
lock or safe or some other mechanism, it is YOUR
RESPONSIBILITY to store your firearms in such a manner that children and
other unauthorized persons cannot gain access to them.
Picture A
Figure 3
Figure 4
Figure 1
Figure 2
8
Figure 5