Manual

COCKING AND UNCOCKING YOUR SHOTGUN
TO COCK:
1) While keeping your fingers away from the triggers, grab the shotgun firmly
with your right hand around the stock’s pistol grip. Place your right thumb on
the top of the right hammer. See Figures 23a and 23b.
2) Pull the hammer rearward until it locks in the cocked position. See Figure 24.
3) Next, place your right thumb on the left hammer
and pull it rearward until it locks in the cocked
position. See Figure 25.
4) Keeping your shotgun pointed in a safe direction,
or at your intended target, remove the safety
and pull the trigger of the barrel you want to
shoot first.
TO UNCOCK:
1) While holding the shotgun firmly by the stock’s pistol grip, break open
the shotgun by using the top lever. Remove any live rounds (see Unloading
Procedures). See Figures 26a and 26b. Repeat this step with the other
trigger.
2) With the shotgun broken open and properly unloaded, disengage the safety.
See Figure 27.
16
Figure 23a Figure 23b Figure 24
Figure 25
Figure 26a
Figure 26b
Figure 27