Manual

8
Use the Security Lock Provided with your Shotgun
This shotgun comes with a security lock to assist in
protecting against unauthorized use. See Picture
A. The shotgun must be unloaded when the security
lock is in place on the shotgun.
WARNING: Using
the security lock cannot substitute for securing your
firearm and ammunition in separate, locked
locations.
The security lock operates as follows:
1. To open the Trigger
Lock put the Key into the
notches of the Trigger
Lock Nut and unscrew it
counter-clockwise. See
Figures 1 and 2.
Remove the Trigger Lock
Screw.
2. To install the Trigger Lock on an over and under
break-open shotgun put the Trigger Lock around the
trigger guard. See Figure 3.
3. Screw the Trigger Lock Nut on the Trigger Lock
Screw (clockwise) and tighten the nut with the key.
DO NOT TIGHTEN THE NUT TOO TIGHT OR
YOU COULD DAMAGE THE LOCK SCREW. See
Figure 4.
4. To remove the Trigger Lock, unscrew the Trigger
Lock Nut with the key and detach the Trigger Lock
Screw. See Figure 5.
W A R N I N G
Always store the key to the security lock: (1) in a
separate location away from the shotgun; (2) in a
secure location unknown and not accessible to
others, especially children. Whether you secure your
firearms by using the supplied security lock, a gun
lock or safe or some other mechanism, it is YOUR RESPONSIBILITY to store
your firearms in such a manner that children and other unauthorized persons
cannot gain access to them.
Picture A
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5