Manual

D) Correctly installed choke tubes: Lead shot choke tubes should fit flush or

slightly below the muzzle end of the barrel. Steel shot choke tubes will protrude

out from the barrel about 3/4” and the mating lip will be flush with barrel end.

E) Before using the shotgun make sure that the choke tubes are installed correctly.

F) Keep choke tubes lubricated and installed. Never fire the gun without a choke

tube installed. Handle choke tubes carefully since the leading edge is very thin.

Notes on Shot Material and Chokes:

1) Shells using Bismuth or Tungsten-Matrix shot are subject to the same

barrel and choke tube limitations as lead shot. Shells using Tungsten-

Iron shot or Hevi-Shot are subject to the same barrel and choke tube

limitations as steel shot.

2) On fixed choke guns, shells loaded with steel, Tungsten-Iron or Hevi-

Shot should be fired only in IC or Cylinder barrels. DO NOT fire steel,

Tungsten-Iron or Hevi-Shot shells in fixed barrels with Modified, Im

proved Modified or Full choke barrels. Lead, Bismuth and Tungsten-

Matrix may be fired in all fixed choke barrels.

3) On fixed choke guns, slugs may be fired in only IC and Cylinder

barrels. DO NOT fire slugs in fixed choke barrels with Modified, Im

proved Modified or Full chokes.

If you would like to buy extra choke tubes (skeet, trap, extra full, etc.) call

1-321-639-4842