Manual

13
To return the shotgun to
the automatic-ejection
mode, simply turn the set
screws counterclockwise
˘ of a turn to their original
position with the set screw
slots oriented in a vertical
position perpendicular to the length of the barrels. See Figures 18 and 19.
W A R N I N G
Never adjust or disable the ejector set screws when the shotgun is loaded.
Adjust the set screws only when the shotgun is completely unloaded.
W A R N I N G
Never remove the ejector set screws from the shotgun. The ejectors are part of
the shell case head support system. Shooting the shotgun with the ejectors
removed or out of place may cause a shell head rupture causing serious personal
injury.
The Barrel Selector (for single-trigger shotguns only): As configured by
the factory, the Model IZH27 single-trigger shotgun is preset to fire the bottom
barrel on the first shot and then the top barrel on the second shot. Once the
shotgun is loaded, you may manually set the shotgun to fire the top barrel first.
To select the top barrel, with the safety engaged in the “on” position, point the
muzzle in a safe direction and push the trigger forward from the rear until you
feel and hear a click. You have now set the shotgun to fire the top barrel on the
first shot and the bottom barrel on the second shot. Note: Once you open the
action with the top lever, the shotgun automatically returns to its original
configuration of firing the bottom barrel first.
W A R N I N G
When you are pushing the trigger forward to select the top barrel, make sure
the safety is “on” and the muzzle is pointed in a safe direction. NEVER use the
barrel selector when the safety is in the “off” or “fire” position. Once you have
used the trigger to select the top barrel, remove your finger from inside the
trigger guard until you are ready to fire.
Figure 19
Figure 18