Datasheet

V1.0
www.ixxat.com
Page 1 of 2
These connectors provide easy and quick termination to any
high-speed CAN/CAN FD product. The connectors are used when
a CAN node without internal terminal needs to be terminated or
if no CAN node is connected at the end of the CAN
bus.According to ISO 11898-2, high-speed CAN buses/systems
must be terminated at their ends by resistors.
The D-Sub termination connector can also be used for CAN FD
buses.
FEATURES AND BENEFITS
ORDER NUMBER 1.04.0075.01000
CAN connector D-Sub 9, plug/female
Bus termination 120 Ohm
Resistor Between pin 2 (CAN-L) and pin 7 (CAN-H)
Pin allocation 1-to-1
Insulator PBT glass fiber reinforced
Contact Brass
Contact plating Gold plated over nickel
Shell Tin plated shell
Current rating 3 A
Dielectric strength 500 V AC for 1 minute
Insulator resistance 500 MOhm min. at 500 V DC
Temperature range -55 °C to 105 °C
Screw UNC #4-40
120 Ohm termination resistor between pin 2 (CAN-L) and
pin 7 (CAN-H)
■
9-pin female D-Sub plug
■
Pin assignment 1-to-1
■
Suitable for the use in CAN and CAN FD buses
■
Easy use between existing cable connection
■
DATASHEET
Termination connector for
CAN/CAN FD (D-Sub plug
female)