Manual

Technical Data 16 (22)
8 Technical Data
8.1 Compact/Embedded/Automotive
USB interface
USB 2.0, Hi-Speed (480 MBit/s)
Microcontroller/RAM/Flash 32 Bit/192 kByte/512 kByte
CAN controller/clock frequency IFI CAN_FD IP/80 MHz
CAN bitrates
10 kbit/s to 1 Mbit/s
CAN FD bitrates
250/500 kbit/s arbitration rate with 500 to 10000 kbit/s
data rate (predefined), user defined bitrate is possible.
CAN/CAN FD transceiver
Microchip MCP2562FDT
CAN bus termination
None
LIN bitrates
Max. 20 kbit/s
LIN transceiver NXP TJA1020
VBAT
LIN
8 to 18 V DC, 12 V DC typical
Dimensions 80 x 50 x 22 mm
CPU clock
180 MHz
Weight
Approx. 100 g
Power supply
Via USB, 5 V DC/300 mA
Galvanic isolation
800 V DC/500 V AC for 1 min
Operating temperature
-20 to +70 °C
Storage temperature
-40 to +80 °C
Relative humidity 10 to 95 %, non condensing
Housing material (compact/automotive)
ABS plastic
Protection class (compact/automotive)
IP40
8.2 PCIe Mini
USB interface
USB 2.0, Hi-Speed (480 MBit/s) via PCIe Mini connector
Form factor F2: Full Mini with bottom-side keep outs
According to PCI Express Mini Card Electromechanical
Specification, Revision 1.2
CAN/LIN connector type
SM03B-SURS-TF by JST (counterpart is 03SUR-32S by JST)
Pre-assembled open-style cable for each CAN and LIN
connector is included.
Microcontroller/RAM/Flash 32 Bit/192 kByte/512 kByte
CAN bitrates
10 kbit/s to 1 Mbit/s
CAN FD bitrates
250/500 kbit/s arbitration rate with 500 to 10000 kbit/s
data rate (predefined), user defined bitrate is possible.
CAN controller/clock frequency IFI CAN_FD IP/80 MHz
CAN/CAN FD transceiver
Texas Instruments TCAN334G
LIN bitrates
Max. 20 kbit/s
LIN transceiver
Microchip MCP2003B
VBAT
LIN
8–36 V DC, typ. 12 V DC
CPU clock
72 MHz
Dimensions 50.95 x 30 mm
Power supply
Via PCIe Mini, 3.3 V DC/300 mA
Operating temperature
-20 to +70 °C
Storage temperature
-40 to +80 °C
Relative humidity 10 to 95 %, non condensing
Galvanic isolation 500 V AC for 1 minute between CAN bus and internal logic
USB-to-CAN
FD
User Manual
4.01.0350.20000 1.5 en-US