Datasheet

V1.0
www.ixxat.com
Page 3 of 3
PIN ALLOCATION
1
8
Pin no. Signal
7 CAN-High
2
3, 6 CAN-GND
5 LIN (only CAN2)
9
LIN
(only CAN2)
Pin no. Signal
1 CAN-High
2
3, 7 CAN-GND
6 LIN (only CAN2)
8
LIN
(only CAN2)
TECHNICAL DRAWING
80 mm
50 mm
22 mm
200 mm
6
9
1
5
1
8
SOFTWARE SUPPORT
Drivers and programming interfaces
A comprehensive and stable driver and software package is available for the USB-to-CAN FD series, which can be
downloaded free of charge from ixxat.com/support.
The Ixxat driver packages for Windows (VCI) as well as Linux, INtime, RTX, VxWorks and QNX (ECI) also enable use in
existing applications without software adaptation. The APIs for CANopen and SAE J1939 also support the USB-to-
CAN FD device family.
The VCI V4 (Virtual Communication Interface) is the driver interface for Ixxat interfaces under Windows and can be
downloaded free of charge from ixxat.com/vci or ixxat.com/support. Customer-specific applications for
communication via CAN, CAN-FD, LIN and Industrial Ethernet can be developed on the basis of the VCI.
Softwaretools
The software tool canAnalyser3 Mini is included in the VCI V4 download package and enables the first analysis steps
and monitoring in CAN networks. Further information about the tools as well as Demo/Trial versions are available
on the Ixxat webpage.