Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The Ixxat USB-to-CAN FD compact with galvanic isolation is a
super easy, robust, versatile, and cost-efficient way to connect a
computer to a CAN FD bus network. It is a very reliable
workhorse for CAN FD applications e.g. in the field of
automotive, mobility, test, development, maintenance or
control applications.
Galvanic isolation reliably enhances the protection of the device
against damage to electronics caused by voltage peaks.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0351.12001
CAN FD / CAN channels 1
CAN bus interface 1 x D-Sub 9, CiA standard pinning according to CiA 303-1
CAN bit rates 10 kbit/s to 1 Mbit/s
CAN FD bit rates 250/500 kbit/s arbitration rate with 500 to 80000 kbit/s data rate
(predefined), user defined bitrate is possible.
CAN bus termination resistors None
CAN controller IFI CAN_FD IP/80 MHz
CAN/CAN FD transceiver MCP2562FDT
Galvanic isolation 800 V DC / 500 V AC for 1 min
USB Interface USB 2.0 Hi-Speed (480 Mbps)
Microcontroller 32 Bit
RAM 192 kByte
CAN and CAN FD in one device
■
Cost-effective and extremely versatile
■
High-precision time-stamp accuracy
■
High data throughput combined with low latency
■
Native USB 2.0 hi-speed (480 MBit/s), compatible with USB 1.1 and
USB 3.x
■
Galvanic isolation
■
1 x CAN FD connection up to 8 Mbit/s
■
Power is taken from the USB bus
■
Common driver interface for easy exchange of the PC interface type
■
Powerful programming interface for Windows (VCI) as well as for Linux
(socketCAN or ECI), QNX and VxWorks (ECI)
■
DATASHEET
USB-to-CAN FD compact