Instructions

Operation
22 (30)
7.3 Indicators
7.3.1 Power LED
Indicates the status of the power supply.
LED state
Description
Comments
Off
No power
Possible causes: device not connected to power supply,
fuse of device damaged, internal power supply
damaged, power supply not sufficient
Green Power
Device fully functional
7.3.2 Status LED
Indicates the device status.
LED state
Description
Comments
Off Device not ready No firmware, application firmware not started
Green flashing (1 Hz) Application firmware started Device in Operational state
Red/green flashing
Configuration file error Rewriting of configuration to device necessary
Green/orange flashing
Device in Configuring state
—
Orange flashing (1 Hz) Automatic baud rate detection Ongoing automatic baud rate detection
Red flashing
Device error
Application signals a device error, error in configuration
or no configuration. Read log file for more information
(see Read and erase LOG File, p. 20).
7.3.3 User LED
Indicates the primary application status and is different, depending on the operating mode.
Bridge
In the Bridge mode the User LED can be configured with user defined settings via Action Rules.
See User Manual CAN-Gateway Configurator for more information.
VCI Interface
The User LED is not used.
ASCII Gateway
LED state
Description
Comments
Orange/Green flashing
No connection monitoring
—
Green flashing Connection monitoring activated Heartbeat mechanism to monitor the connection (PING
REQUEST, PING RESPONSE)
CAN@net NT User Manual
4.01.0332.20000 1.6 en-US