Instructions
Table Of Contents
- 1 User Guide
- 2 Safety Instructions
- 3 Scope of Delivery
- 4 Product Description
- 5 Installation
- 6 Configuration
- 7 Operation
- 8 Default Network Settings
- 9 Default TCP/UPD Ports
- 10 Technical Data
- 11 Support/Return Hardware
- 12 Disposal
- A Regulatory Compliance
Operation
21 (30)
7 Operation
Fig. 15 Ports and LEDs
1 Status LED
2 Power LED
3 Mini USB port
4 CAN LEDs 1 to 4
5 User LED
6
Ethernet LED
7
Link speed LED
8
Ethernet port
9
Link/Activity LED
7.1 Ethernet Port
Designed as standard RJ45 port with pin allocation according to Ethernet standard. Because of
the Ethernet PHY auto-crossover feature the device can be connected with a crossover cable or
with a one-to-one network cable.
The shield of the port is connected to the ground of the printed board via a 1 nF capacitor.
Pin Allocation Ethernet Port
Pin no.
Signal
1 TX+
2 TX-
3 RX+
4
Connected to pin 5
5
Connected to pin 4
6 RX-
7
Connected to pin 8
8
Connected to pin 7
7.2 Mini USB Port
Provided to connect the device for configuration.
1
45
2
3
9
8 7
6
CAN@net NT User Manual
4.01.0332.20000 1.6 en-US