Instructions
Table Of Contents
- 1 User Guide
- 2 Safety Instructions
- 3 Scope of Delivery
- 4 Product Description
- 5 Installation
- 6 Configuration
- 7 Operation
- 8 Default Network Settings
- 9 Default TCP/UPD Ports
- 10 Technical Data
- 11 Support/Return Hardware
- 12 Disposal
- A Regulatory Compliance
Configuration 19 (30)
► For the CAN-Ethernet-CAN Bridge connect the devices one after another and download the
configuration to each device.
► Observe that for the configuration of a CAN-Ethernet-CAN Bridge each device must be
configured with the same configuration file. If the configuration is changed, the new
configuration file has to be downloaded again to all devices.
It is possible to add information about the configuration in fields Author, Configuration Name and
Additional Info.
6.5 VCI Interface Configuration
The VCI interface mode is only possible via Ethernet.
Fig. 13 VCI Interface Mode
► Make sure that the device is connected (see Connecting Possibilities, p. 12) and the basic
configurations are set (see Basic Configuration, p. 13).
► Make sure, that the desired operational mode is selected in drop-down list (2).
► In configuration tree (1) select CAN@net — General to add information about the
configuration in fields Author, Configuration Name and Additional Info.
► To write the configuration to the device, click button Write to (3).
► Configure the Device Server (see Installation Guide VCI Driver).
2 3
1
CAN@net NT User Manual
4.01.0332.20000 1.6 en-US