Instructions
Table Of Contents
- 1 User Guide
- 2 Safety Instructions
- 3 Scope of Delivery
- 4 Product Description
- 5 Installation
- 6 Configuration
- 7 Operation
- 8 Default Network Settings
- 9 Default TCP/UPD Ports
- 10 Technical Data
- 11 Support/Return Hardware
- 12 Disposal
- A Regulatory Compliance
Configuration 17 (30)
6.3 ASCII Gateway Configuration
Fig. 11 ASCII Gateway Mode
► Make sure, that the device is connected (see Connecting Possibilities, p. 12) and that the
basic configurations are set (see Basic Configuration, p. 13).
► Make sure, that ASCII Gateway Mode is selected in drop-down list (2).
► In configuration tree (1) select CAN@net — General.
► Select the desired protocol line ending (4).
► Define the IP port (5) to be used.
► To write the configuration to the device, click button Write to (3).
► To exchange messages in the Gateway mode, use ASCII commands (for more information
see Software Design Guide CAN@net NT 200/420 Generic Protocol for Gateway Mode on
www.ixxat.com).
It is possible to add information about the configuration in fields Author, Configuration Name and
Additional Info.
3
1
4
5
2
CAN@net NT User Manual
4.01.0332.20000 1.6 en-US