Instructions
Table Of Contents
- 1 User Guide
- 2 Safety Instructions
- 3 Scope of Delivery
- 4 Product Description
- 5 Installation
- 6 Configuration
- 7 Operation
- 8 Default Network Settings
- 9 Default TCP/UPD Ports
- 10 Technical Data
- 11 Support/Return Hardware
- 12 Disposal
- A Regulatory Compliance
Installation 10 (30)
5.3 Checking and Updating the Firmware
5.3.1 Checking the Device Firmware
► Make sure, that the latest VCI driver is installed.
► Make sure, that the device is correctly connected to the host computer and to power supply.
► Make sure that the latest CAN-Gateway Configurator is installed (check within support area
on www.ixxat.com).
► Start the Ixxat CAN-Gateway Configurator.
► Open menu Scan and select All Ixxat devices.
→ Connected devices and firmware version of the devices are shown.
5.3.2 Updating the Device Firmware
Whether updating is permitted via Ethernet or a password is needed, is defined in the
security settings of the CAN-Gateway Configurator. The default password is IXXAT. For
more information see user manual CAN-Gateway Configurator.
The firmware is constantly improved and expanded! Check if a newer firmware version is available
within the support area on www.ixxat.com.
To use all features the latest firmware versions of the CAN-Gateway Configurator and of the
CAN@net NT must be installed.
If the current firmware of the CAN@net NT in use is V4 or older:
► See update package on www.ixxat.com for information about updating to V5 or contact
Ixxat support.
If the current firmware of the CAN@net NT in use is V5:
► Check if newer firmware is available on www.ixxat.com.
► Download and unzip the update package.
► Make sure, that the device is connected to power supply.
► Connect the device to the computer via USB.
► Make sure that the latest CAN-Gateway Configurator is installed (check within support area
on www.ixxat.com).
► Start the CAN-Gateway Configurator.
► In drop down list Select device type select the device in use.
► In drop down list Select device version select V5.
► Scan for devices with button Scan
and select the device in use in the combo box Target
Device.
► Click button Connect
.
► Open menu Target and select Read configuration from target.
► Save the configuration on the computer.
► Open menu Target and select Update Firmware.
CAN@net NT User Manual
4.01.0332.20000 1.6 en-US