Manual

User Guide 3 (22)
1 User Guide
Please read the manual carefully. Make sure you fully understand the manual before using the
product.
1.1 Target Audience
This manual addresses trained personnel who are familiar with CAN, LIN and the applicable
standards. Only ESD trained staff is authorized to install the interface. The contents of the
manual must be made available to any person authorized to use or operate the product.
1.2 Related Documents
Document
Author
Installation Guide VCI Driver
HMS
1.3 Document History
Version
Date
Description
2.0
December 2016 Revised and edited in new design
2.1
March 2017 Minor corrections, added note on USB specification and extension cable
2.2 May 2017
Minor corrections, added trademark information
2.3
October 2017 Minor corrections, changes in chapter LIN interface
2.4 August 2018
Added information about resistor in LIN mode, target audience and intended
use
2.5
March 2019 Layout changes
2.6 June 2019
New disclaimer, rebranding
2.7
December 2021 VCI support pages, restrictions for not galvanically isolated versions, and UKCA
compliancy information added
1.4 Trademark Information
Ixxat
®
is a registered trademark of HMS Industrial Networks AB. All other trademarks mentioned
in this document are the property of their respective holders.
USB-to-CAN
V2
User Manual
4.01.0280.20000 2.7 en-US