Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The Ixxat USB-to-CAN V2 automotive with two CAN channels
(high-speed / low-speed), LIN and galvanic isolation is a super
versatile, uncomplicated and cost-efficient way to connect a
computer to CAN/LIN bus networks. It is a very reliable
workhorse for CAN applications e.g. in the field of automotive,
mobility, test, development, maintenance or control
applications.
Galvanic isolation reliably enhances the protection of the device
against damage to electronics caused by voltage peaks.
Two RJ45 to D-Sub 9 adapter cables are included.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0283.22042
CAN channels (high speed) 2
CAN channels (low speed) 1
CAN bus interface 2 x RJ45 (incl. 2 x D-Sub 9-Adapter with CiA standard pinning according to
CiA 303-1)
CAN bit rates 10 kbit/s to 1 Mbit/s (high-speed), 10 kbit/s to 125 kbit/s (low-speed)
CAN bus termination resistors yes, CAN low-speed with 4.7 kΩ
CAN controller Internal; CAN 2.0 A/B
CAN high-speed transceiver SN65HVD251D
CAN low-speed transceiver NXP TJA1054
Cost-effective and extremely versatile and reliable
■
High-precision time-stamp accuracy
■
High data throughput combined with low latency
■
Native USB 2.0 hi-speed (480 MBit/s), compatible with USB 1.1 and
USB 3.x
■
Galvanic isolation
■
2 x high-speed CAN connection up to 1 Mbit/s with 2 x RJ45 sockets
■
CAN 1 can be switched between high- and low-speed (ISO 11898-3)
■
1 x LIN communication in master or slave mode
■
LIN frame format switchable
■
2 x RJ45 to 9-pin D-Sub adapter cables included
■
Common driver interface for easy exchange of the PC interface type
■
Powerful programming interface for Windows (VCI) as well as for Linux
(socketCAN or ECI), QNX and VxWorks (ECI)
■
DATASHEET
USB-to-CAN V2 automotive