Datasheet

Table Of Contents

V1.0

www.ixxat.com

Page 1 of 3

The Ixxat USB-to-CAN V2 compact is an uncomplicated and cost-

efficient way to connect a computer to a CAN bus network and

is a very reliable workhorse for CAN applications e.g. in the field

of test, development, maintenance or control applications.

FEATURES AND BENEFITS

ORDER NUMBER 1.01.0281.11001

CAN channels (high speed) 1

CAN bus interface 1 x D-Sub 9, CiA standard pinning according to CiA 303-1

CAN bit rates 10 kbit/s to 1 Mbit/s

CAN bus termination resistors None

CAN controller Internal; CAN 2.0 A/B

CAN high-speed transceiver SN65HVD251D

Galvanic isolation 1000 V DC for 1 sec., 500 V AC for 1 min.

Time stamp resolution 150 - 250 μs

USB Interface USB 2.0 hi-speed (480 MBit/s), compatible with USB 1.1 and USB 3.x

USB connector Type-A connector

Microcontroller 32 Bit

RAM 192 kByte

Flash 512 kByte

Power supply +5 V DC (via USB port)

Power consumption 48 mA - 200 mA

Supply voltage +5 V DC (via USB port)

Cost-effective and extremely reliable

■

High-precision time-stamp accuracy

■

High data throughput combined with low latency

■

Native USB 2.0 hi-speed (480 MBit/s), compatible with USB 1.1 and

USB 3.x

■

High-speed CAN connection up to 1 Mbit/s with 9-pin D-Sub plug

■

Common driver interface for easy exchange of the PC interface type

■

Powerful programming interface for Windows (VCI) as well as for Linux

(socketCAN or ECI), QNX and VxWorks (ECI)

■

DATASHEET

USB-to-CAN V2 compact

PAGE 1
DATASHEET USB-to-CAN V2 compact The Ixxat USB-to-CAN V2 compact is an uncomplicated and costefficient way to connect a computer to a CAN bus network and is a very reliable workhorse for CAN applications e.g. in the field of test, development, maintenance or control applications. FEATURES AND BENEFITS ■ Cost-effective and extremely reliable ■ High-precision time-stamp accuracy ■ High data throughput combined with low latency ■ Native USB 2.0 hi-speed (480 MBit/s), compatible with USB 1.1 and USB 3.
PAGE 2
ORDER NUMBER 1.01.0281.
PAGE 3
SOFTWARE SUPPORT Drivers and programming interfaces A comprehensive and stable driver and software package is available for the USB-to-CAN V2 series, which can be downloaded free of charge from ixxat.com/support. The Ixxat driver packages for Windows (VCI) as well as Linux, INtime, RTX, VxWorks and QNX (ECI) also enable use in existing applications without software adaptation. The APIs for CANopen and SAE J1939 also support the USB-toCAN V2 device family.