Manual
Table Of Contents
- Important User Information
- P. About This Document
- 1. Product Overview
- 2. CANopen Fieldbus Functionality
- 3. Transparent CAN Mode
- 4. Installation
- 5. Configuration
- 6. CANopen Module Specification
- 7. Supported Objects
- 8. Interface Functions
- A. Technical Specification
- B. Status LED Timing Diagrams
- C. CANopen Emergency Codes
- D. Error Codes (RET)
Configuration 15
Doc.Id. HMSI-216-117
CM CANopen Module for SIMATIC S7-1200
Doc.Rev. 1.00
5. Select the CM CANopen module in the list as shown in the picture. Drag and drop an instance
of the module to the left side of the PLC module.
6. Double click on the Ethernet connector on the PLC and enter a proper IP address for the PLC.