Datasheet

V1.0
www.ixxat.com
Page 3 of 3
PIN ALLOCATION
Pin no. Signal
7 CAN-High
2
3, 6 CAN-GND
5 Shield
1
TECHNICAL DRAWING
72 mm
100 mm
30 mm
1
SOFTWARE SUPPORT
CANopen CONFIGURATION AND TIA PORTAL INTEGRATION
The seamless integration into the SIMATIC world is one of the most essential requirements when extending of the
SIMATIC automation system with networked fieldbus equipment that is not based on either PROFIBUS or PROFINET.
HMS has addressed this need enabling a seamless integration of the CM CANopen module into TIA Portal.
Configuration of the connected CANopen network is intuitively performed with the included CM CANopen
Configuration Studio. The software and TIA configuration files can be downloaded free of charge from ixxat.com/
support.
Once the configuration is finalized, the CANopen network configuration is downloaded into the CM CANopen
module via USB connection and locally stored in non-volatile memory. If one of the slave devices in the connected
CANopen network has to be replaced, configuration data for this device will be downloaded automatically by the
CM CANopen module once the device is reattached, significantly reducing down-times in high availability
applications.