User's Manual

O G O 2 Use r Ma nua l
4
錯誤! 尚未定義樣式。
Fig ure 3: Installing the SIM C ard
3 (Optional) If you want to use a Micro SD card with the device,
insert the SD card in the SD card slot.
4 Now, with the battery label facing up, match the battery contacts
with the contacts in the battery slot. Push the battery in, contacts-
side down first (Figure 4).
Fig ure 4: Inse rting the Batte ry
5 Push the other side down to slide the battery in until it clicks into
place.
No te : To remove the battery, gently lift it up from the side opposite
the contacts.
6 Replace the back cover (Figure 5).
No te : Make sure that the battery has been properly installed
before charging or powering on your Ogo.