Brochure

iWave
®
-R
Residential Air Cleaner
Description
With technology installed in over 100,000 applications, iWave-R
is the world’s first self-cleaning, no maintenance needlepoint
bi-polar ionization generator designed specifically for treating
air in residential duct A/C systems. As the air flows past the
iWave-R, positive and negative ions actively purify the supply
air, killing mold, bacteria and viruses in the coil and living space.
The ionization process also reduces allergens, smoke and static
electricity, as well as controlling odors (cooking, pet, VOCs) and
other particles (no more sunbeams) in the air without creating
ozone or any harmful byproducts.
Application
iWave-R treats the air in any brand of residential duct air
conditioning systems up to 6 tons (2400 CFM) in size with no
maintenance and no replacement parts. Designed for universal
mounting, the iWave-R typically requires only 15 minutes to
install inside or outside of duct, or to attach magnetically near
the indoor fan in the air handler. Simply connect to power using
its patent-pending voltage input capability. Install between air
filter and cooling coil to treat the indoor coil; as an alternative,
the iWave-R can be installed in the supply air. iWave-R always
works at peak performance, producing over 160 million ions/
cc, more than any other ionizer product on the market. Its
patent-pending self-cleaning design includes a programmable
cleaning cycle that can clean the emitter brushes every 1, 3, 5
or 10 days. The iWave-R is factory set to clean every third day
which is adequate for a typical installation. iWave-R does not
create “black walls” as negative-only ionizer products will do.
NO MAINTENANCE AIR PURIFIER FOR
RESIDENTIAL AIR CONDITIONING SYSTEMS
• Patent-pending self-cleaning design ensures
ongoing peak performance
• Needle point ionization actively treats air in the
living space
• For duct systems up to 6 tons (2400 CFM)
• Easily installs in minutes in A/C system
• Universal voltage input – 24VAC to 240VAC!
• Universal mounting with magnets
• Flexible design with no replacement parts
• Kills mold, bacteria and viruses
• Reduces allergens, odors, smoke, static electricity
and other airborne particles
• Keeps coil cleaner
• Programmable cleaning cycle
• Alarm contact option for secondary notification
• UL and cUL approved
• Three-year warranty
Input Voltage: 24VAC to 240VAC
Power (VA): 10 VA
Frequency: 50/60 HZ
System Size: 6 tons (2400 CFM)
Dimensions: 6" L x 4.8" W x 2" D
Weight: 1 lb.
Electrical Approvals: UL and cUL approved
Service Temp. Range: -40ºF to 160ºF
Packaging
1 each 4900-20
iWave-R Installation Instructions
1. Disconnect air handler power before installing.
2. Mount the iWave-R after the particle filter and before
the indoor coil. This ensures pathogens (i.e., mold) and
odors are controlled throughout the entire depth of the
coil in addition to the breathing space.
3. The iWave-R is designed with universal mounting- either
attach with screws or affix to the system with integral
magnets. Mount near the fan inlet (shaft side) on a metal
surface in the air handler, internal wall duct or external
wall duct depending on what is best for the installation.
For external duct mount, a three inch diameter hole will
need to be cut/drilled out of the duct. IMPORTANT:
If mounting on the fan housing, ensure the iWave-R is
secured from fan vibration - use short length self-tapping
screws so as not to impair operation of fan.
Continued on back.
Nu-Calgon Product Bulletin 4-15
Indoor Air Quality
Specifications
2611 Schuetz Rd. • St. Louis, MO 63043 • 800-554-5499 • www.nucalgon.com
Calgon is a licensed trade name • (1017) 4-15