Installation Guide

4: Apply Soapy Water
Use a sponge or spray bottle to apply a thin layer of soapy water to the wall or surface to be tiled to
allow for more time to place and adjust a sheet of tile.
Ivy Hill Tile Tip: Luxe Core tiles have permanent adhesive on the back so that they will stay in place and
perform just like traditional tile installation. The soapy water allows for a few minutes of time before the
tile is set in place so that you can adjust a mosaic sheet during installation. Use 2-3 drops of dishwashing
soap per cup of water.
5: Peel & Stick
Remove the peel-away backing from tile and place in desired location on wall or surface. When all the
tiles are in place, press firmly to ensure that the mosaic tile sheets have a strong bond to the wall or
surface.
Ivy Hill Tile Tip: Peel away only about 1/4 of the backing on a single sheet when you begin so that you
can more easily place your tile. Slowly remove the rest of the film and press the whole sheet on the wall
or surface. If you are installing interlocking tiles (mosaic sheets where the tiles fit together like a puzzle
piece), place the interlocking parts together first, followed by the rest of the tile sheet.
6: Grout (if Required)
Most Luxe Core tiles do not require grout thanks to their seamless design. If the tile does require grout,
follow the manufacturer’s instructions for proper installation.
Ivy Hill Tile Tip: You will want to use non-sanded grout for Luxe Core tiles to protect the decorative
finish of the product.
Not suitable for wet applications, including showers.