Installation & Assembly

CHAIR/LOVESEAT
STEP 1:
Please put the Loveseat Body (3) without Back Cushion (1) and Seat Cushion (2) upside down on a
carpeted or padded area by two adults to make the round metal plate on each corner fully visible.Open the Zipper
on the bottom of Loveseat Body (3) as shown, take out the packages of 4 pieces of Corner Legs (4),
then close the Zipper on the bottom of Loveseat Body (3).
Take off the Black Protection Cover on the Corner Legs (4).
Please insert 1 piece of Corner Leg (4) into the hole on the round metal plate in the corner. Use hands to tighten
the Corner Leg (4) clockwise until secure. Repeat the same steps for other 3 pieces of Corner Legs (4).
X5 PCS
STEP 2:
Carefully turn over the Loveseat Body (3) and put on the Back Cushions (1) and Seat Cushions (2).
Assembly is complete.The Loveseat is ready to enjoy now!
Page 2 of 2
Black Protection Cover
x 4PCS
Legs inside