Owner Manual (White)

54
Pre-Installation (continued)
HARDWARE KIT
NOTE: Hardware not shown to actual size.
AA
BB
CC
Part Description Quantity
AA
#8-32 x 3/4" philips mounting bracket screw 2
BB
Wire nut 3
CC
Allen key 1
PACKAGE CONTENTS
Part Description Quantity
A
Light heads & fixture 1
B
Mounting plate tightening bolt (pre-installed) 1
C
Mounting plate with gasket (pre-installed) 1
D
Hanger Wire for hands-free installation (pre-installed) 1
Installation
1
For best results
Wall Mount
1-1/2" 1-1/2"
Round Octagonal
A
B
D
C
NOTE: Mounting plate (D) mounts to recessed
mounted standard junction boxes. Junction box
must be at least 1-1/2 inch in depth for proper
installation for recessed mount application
(fig 1).
(fig 1).
2
Shut electric power off
☐ At wall switch verify it is in the o posi-
tion (fig 1).
☐ At the main electrical panel turn o the
circuit breaker that supplies power to
the outlet box you are working on (fig
2).
☐ For screw-in type fuses unscrew the
fuse that supplies power to the outlet
box you are working on (fig 3).
(fig 1).
(fig 2).
(fig 3).
☐ Install light 5-15 feet above the ground.
☐ When installing two fixtures on one
switch, make sure the switch is rated for
at least a 1A inductive load.
☐ Do NOT wire to dimming switch.