AURA LED ARCHITECTURAL WALL SCONCE INSTALLATION, USAGE, & CARE GUIDE Questions? / Missing Parts? / Need Accessories? Before returning to the store, call or email our Customer Service.
Table of Contents Pre-Installation Table of Contents.......................... 2 Safety Information........................ 2 Pre-Installation.............................. 3 Planning Installation...................... 3 Specifications................................... 3 Tools Required................................. 3 Hardware Included......................... 4 Package Contents.......................... 4 Installation...................................... 5 Operation .................................
Pre-Installation (continued) Installation HARDWARE KIT 1 NOTE: Hardware not shown to actual size. BB AA ☐ Install light 5-15 feet above the ground. ☐ When installing two fixtures on one switch, make sure the switch is rated for at least a 1A inductive load. CC ☐ Part Description AA #8-32 x 3/4" philips mounting bracket screw 2 BB Wire nut 3 CC Allen key 1 For best results Wall Mount Do NOT wire to dimming switch.
Installation (continued) 3 Installation (continued) 4 Remove the mounting plate NOTE: The mounting plate (C) comes pre-assembled on the light fixture (A) for shipping. NOTE: The mounting plate tightening bolt (B) comes pre-installed on the light fixture. ☐ Remove the mounting plate (C) from the back of the fixture by loosening the mounting plate tightening bolt (B) using the allen key (CC).
Care and Cleaning Installation (continued) 7 ☐ ☐ 8 Mounting the light fixture ☐ Once the fixture is wired, place the light fixture (A) onto the mounting plate (C) so the top sloped grove on the plate rests on the top sloped grove on the back of the fixture. Caulking around the light fixture Caulk around the mounting plate (C) and surface with silicone sealant (not included).
5-Year Limited Warranty This is a limited warranty offered by us for a period of five years from the date of purchase to its customers. We warrant to customers that the products will be free from defects in material and workmanship. The obligation of the company under this warranty is limited to the provision of replacement of products and is extended to the original purchaser of the product on presenting valid purchase receipt or other proof of date of original purchase acceptable to us.
