Owner Manual

PAGE 1
TROUBLESHOOTING 1. If sparks are found, please turn off the electricity and check if all wires are installed properly. 2.Check connections between supply wires and fixture wire, Remove wire nut and secure It hack. 3.1 fixture does not light up, disassemble the connector between the transformer and fixture wires. Re-install it to ensure the connection is secures.
PAGE 2
PARTS INCLUDED INSTALLATION TOOLS REQUIRED / 78 Ladder Philips Screwdriver ETN Gog ale JO, Electrical Tape SPECIFICATION Voltage :100V 265 VAC Frequency 60Hz Wattage 30W Color Temperature | :3000K Brightness :2500Lm Dry, Damp or Wet Location Listed: Dry & Damp WARNING! Description Qty | Part Circle Cross Bar Mounting Plate 1 AA A Outlet Box Screw 2 BB Mounting Screw 2 ce Wire Mut 2 Dx PLEASE TURN OFF / DISCONNECT ALL NECESSARY ELECTRICITY PRIOR TO THE INSTALLATION, 1.