Sofa ASSEMBLY INSTRUCTIONS
Guidelines Thank you for selecting our product! Our primary objective is to provide fast, friendly customer service to all of our customers. We are here to help if you have any questions, comments, or are in need of warranty replacement parts. 2 FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY • Do not stand on the item or use as a step ladder • The piece has been tested and approved for users weighing up to 250 lbs (113kg) per seat.
Pre-Assembly Preparation: Please read through this instruction booklet before beginning assembly of this item. Two adults are recommended for assembly. • Clear out the space for assembly and lay out all parts on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • Keep small parts and pieces away from children and pets until fully assembled.
Parts List 4
Step 1-- Remove all parts from the carton and place them on a protected surface or carpet. Place the Seat Frame (G) upside down and open the bottom flap. Take the Arms (F1 & F2) then take Thumb bolts (B), Flat Washers (C), Allen Key (D) and Thumb Bolts (E) out of the seat box.
Step 2-- 6 Attach Seat Frame (G) to Arm (F2) by sliding the receivers into the mechanism posts located on sides of Arm (F2) , press down Seat Frame (G) then Move Seat Frame (G) to attach the Arm (F1), press down on both sides of the Seat Frame (G) to firmly secure.
Step 3-- 1. Slide the Back Frame (H) into the Arms (F1 & F2 ) & align the bracket on the Arms (F1 & F2) until fully engaged. 2. Insert Thumb Bolts (E) x 2 into sides of Arms (F1 & F2) holes then insert Thumb Bolt (E) x1 into sides of Back Frame (H) hole and tighten all the Bolts.
Secure the back cover to the hook & loop strip & secure the bottom cover to the hook & loop strip.
Step 5-- 1. Open the vacuum packed Seat Cushion (I) by carefully cutting the bags with a pair of scissors. Insert the Seat Cushion (I) into the appropriate Seat Cover (J). Ensure the cushion cover completely covers the filler as image (2) When closing the zipper ensure as image (3) the cushion is compressed, this will allow the zipper to close with ease. Fluff all cushions and pillows to allow them to expand. 2. Lastly, position Seat Cushions on the sofa.
Limited Warranty The product you have purchased is warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases these products from an authorized dealer or retailer as shown by the original sales receipt. This warranty does not apply too “as is” or previously owned products.
