Assembly Instructions

Figure 1
Attach Side Leg (B) to Top Panel (A)
with Bolts (3), Spring Washers (2)
and Flat Washers (1).
Tighten Bolts (3) using Allen Wrench
(4) as shown in Figure 1.
Figure 2
Attach Stretcher (D) to assembled
unit on Figure 1 with Bolts (3), Spring
Washers (2) and Flat Washers (1).
Tighten Bolts (3) using Allen Wrench
(4) as shown in Figure 2.
Page 3