Outdoor Dining Chair
PART LIST A C B Back Panel 2 PCS F Seat Panel 2 PCS G E D Right Arm Panel 2 PCS Left Arm Panel 2 PCS Seat Cushion Cover * 2 PCS H *Please note cushion covers will ship separately.
Step 1. Lay left arm panel (part D) down on a soft flat surface, such as carpet, as shown below. Attach seat panel (part B) to left arm panel (part D) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. #4 #1 #3 B D #1 #3 #4 x2 x2 x1 Step 2. Attach right arm panel (part C) to seat panel (part B) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
Step 3. Attach back panel (part A) to assembled unit (parts B,C & D) using shorts bolts (part #1), long bolts (part #2), flat washers (part #3) and allen wrench (part #4). NOTE: Please fully tighten all bolts at this time. #4 #1 #3 #4 #2 #3 C A B D Step 4. Insert seat cushion core (part F) into seat cushion cover (part E). lnsert back cushion core (part H) into back cushion cover (part G).
Step 5. Carefully turn unit upright. Place seat cushion and back cushion as shown below. Repeat steps 1-5 to assemble remaining chair.
