Installation & Assembly

Note: Every cam lock bolt
musthave a cam lock
connector in order to
fasten the parts together.
(1) ..
Align the cam connector with its
.
Secure the threaded
end
of the cam bolt
side opening(or arrow}
pointing to the small
by
using a·.
.drilled hole.
screwdriver.
Turn right (clockwise)to tighten.
(2)
(3)
Two parts should fit snugly
Insert the cam lock
against
each other.
'bolt
into the
pre-drilled hole
above·the cam
connector.
~
(4)
Turn the cam connector with ~ .
screwdriver until
it·wUI not turn
any
more with light to moderate
force.
Turn right (clockwise)to tighten.
)
" ___ II:'