Owner Manual

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on

mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground wire,

connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding

screw on mounting bracket. Tighten ground screw.

Step 4

Install the Mounting Plate(I) to the junction box with

Mounting Screw (J)

Seperate the Mounting Plate(I) from the Canopy(H)

by turning the Canopy Nut(F) anti-clockwise.

Step 5

Attach the Canopy(H) to the junction box and fix it by

turning the Canopy Nut(F) clockwise

Insert the bulbs (B) into the Sockets

PLEASE USE TYPE"B" BULB MAX 40-WATT OR

CFL BULB MAX 13-WATT OR LED BULB MAX 9-

WATT

THERE ARE 6PCS LED 4-WATT BULB IN THE BOX

Step 6

Consult a qualified electrician to ensure correct

branch circuit conductor.

ENJOY YOUR LAMP

3/3