Owner Manual

Installation
Step 1
Unpack all parts from cartons carefully.
Place the Canopy(H)onto the Hanging Loop(G)
Place the tube of Mounting Plate(I)into the theaded portion
of the Hanging Loop(G) and fix it by turing the Canopy
Nut(F) clockwise till tight.
Attach the Closable Link(D) onto the Hanging Loop(G)
Step 2
Thread Fixture Loop (C) to Loop
Assembly (L).
Attach the Closable Link(D) onto the
Fixture Loop (C)
Respectively attach the Closable
Link(D) onto the loop of the Loop
Assembly (L) and Connecting Rod (M)，
then respectively attach clip of the Loop
Assembly (L) to ring of the Lamp Body
(A).
Step 3 Wire connection
Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:
Black White
*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)
Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor
2/3