Installation & Assembly

Step 3
3.1Attach Leg(B) to Table Top(A) by placing a Washer(①), Spring
Washer(②) and Nut(③) onto the Iron Bar(⑥) and tightening with Socket
Wrench(⑤).
Repeat the same process with the other three Legs.
Tighten the Nuts fully in a sequential manner.
3.2Insert Leg Caps(④) into the base of the Legs(B) as pictured above.
Step 4
Your Table is now ready for use.
This Table can only be used on a flat, level surface.
3.1
3.2
Page 4 OF 5