Caution: You must read this before you proceed TABLE Label Description QTY A Table Top 1 B Leg 4 Description QTY ① Washer 5 ② Spring Washer 5 ③ Nut 5 ④ Leg Cap 5 ⑤ Socket Wrench 1 Label ⑥ Picture Picture Iron Bar (Nut at one 4 end) Page 1 OF 5
Before Beginning Assembly: Overview Table Top(A) Leg(B) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Position the Table Top(A) facedown on a clean, non-marring surface. Insert Iron Bar(⑥) into mounting position at the corner of the Table and tighten with your hand until locked into position. Repeat the same process with the remaining three Iron Bars(⑥). Fully tighten all Iron Bars. Step 2 Insert the Leg(B) onto the Iron Bar(⑥) as pictured above. Thread the Iron Bar(⑥) through the mounting position at the base of the Leg(B) until threading on the Iron Bar(⑥) is clearly visible.
Step 3 3.1 3.2 3.1Attach Leg(B) to Table Top(A) by placing a Washer(①), Spring Washer(②) and Nut(③) onto the Iron Bar(⑥) and tightening with Socket Wrench(⑤). Repeat the same process with the other three Legs. Tighten the Nuts fully in a sequential manner. 3.2Insert Leg Caps(④) into the base of the Legs(B) as pictured above. Step 4 Your Table is now ready for use. This Table can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
