Installation Instructions

1A
Install the Fixture
2
Determine the wanted height or look of the fixture with the provided pivot, chain, and stems, then assemble them by screwing them
together. All parts may be used alone or in used in combination.
Feed the fixture wires through the stem/chain assembly, then screw the stem assembly onto the fixture.
If necessary, screw the threaded nipple tightly onto the mounting plate.
Install the collar nut and canopy onto the stem assembly.
Feed the fixture wires through the mounting plate/nipple assembly and screw the screw collar onto the threaded nipple.
Align and secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut tightly
onto the screw collar.
Screw the crystal cluster to a threaded pipe, then screw the threaded pipe to the fixture. Repeat for remaining crystal clusters.
NOTE: the shortest threaded pipe must be installed to the bottom center of the fixture body.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
1
2
3
4
5
6
7
8
9
10
11
12
JUNCTION BOX
MOUNTING PLATE
THREADED NIPPLE
SCREW COLLAR
CANOPY
COLLAR NUT
STEM ASSEMBLY
CRYSTAL CLUSTER
LAMP
CHAIN
1
SHORTEST THREADED PIPE
SWIVEL
9
8
11
12
2
1
FIXTURE
BODY