Installation & Assembly

Step5
Stand up the table,check stability and then tighten all Bolts at all joints.
Note:DO NOT fully tighten a BOLT in one go and then move on to the next. Rather in a
sequential manner, gradually tighten each Bolt until all Bolts are evenly secured.This
methodology will ensure maximum evenness once all Bolts are fully tightened.
Step6
Adjust the Legs' Pre-installed Levelers until the Table is level. To
adjust the Levelers, tilt the Table to rest on 2 legs with assistance from your adult partner.
Adjust the levelers to the desired height to avoid wobbles.
B
Stand up the table,check stability and then tighten all Bolts at all joints.
Note:DO NOT fully tighten a BOLT in one go and then move on to the next. Rather in a
sequential manner, gradually tighten each Bolt until all Bolts are evenly secured.This
methodology will ensure maximum evenness once all Bolts are fully tightened.
Adjust the Legs' Pre-installed Levelers until the Table is level. To
adjust the Levelers, tilt the Table to rest on 2 legs with assistance from your adult partner.
Adjust the levelers to the desired height to avoid wobbles.
Adjust high for
balance
Adjust low for
balance