Installation & Assembly

This Table has multiple parts and may require up to 30 minutes to assemble. To give you
an overview of the Table parts, the above picture is provided to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.
Step 1
Open the carton and place all the parts onto a clean, non-marring surface.
Attach the Middle Support Bar(D) between the 2 Top Side Bars(D) with Bolts(
), using the Allen Key(
)
as shown above.
Do not fully tighten Bolts.
Step 2
Insert the Legs(A)into the sides of the Top Side Bars(C).
Attach the Legs(A) to the Top Side Bars(C)with Bolts(
), using the Allen Key(
)as shown above.
Do not fully tighten Bolts.
D
C
A
C
This Table has multiple parts and may require up to 30 minutes to assemble. To give you
an overview of the Table parts, the above picture is provided to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Attach the Middle Support Bar(D) between the 2 Top Side Bars(D) with Bolts(
), using the Allen Key(
)
as shown above.
Do not fully tighten Bolts.
Insert the Legs(A)into the sides of the Top Side Bars(C).
Attach the Legs(A) to the Top Side Bars(C)with Bolts(
), using the Allen Key(
)as shown above.
Do not fully tighten Bolts.
A