Installation Instructions
Page 2/2
Fig.3
C
US
1:There have three heads with LED module (L) in this
fixture,if one of them not work ,replacethe whole
lamp head as shown in Fig. 3,make sure the power is
off before you replace ;
2:Twist-off the screw (M ) with Allan Key provide,pull out
the wire from the rod ;
3:Disconnect the wire from (K),replace a new lamp head ;
4:Repeat 3-1 to assembly the fixture.
Your replace is now complete , return power to the
junction box and text the fixture
LED module replace(Fig.3)
Shut
off power before replacing
L
K
M
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
AVERTISSEMENT!COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEU
READ AND SAVE THESE INSTRUCTIONS
For LED Ceiling
INSTALLATION INSTRUCTIONS