Owner Manual

Step 1
Step 2
Step 3
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Shelf(B) onto a platform, as shown in picture above.
Align the Table Leg(C) with mounting positions of Shelf(B) as shown above.
Attach Table Leg(C) to Shelf(B) using Bolts(③), and Washers(④) with Allen Key(①).
Do not fully tighten the Bolts.
Attach Table Legs(C) to Shelf(B) using Bolts(③), and Washers(④) with Allen Key(①).
Repeat the same assembly process for the remaining three legs and respective screw
points.
Do not fully tighten the Bolts.
Platform
B
B
Page 3 OF 5