Caution : You must read this before you proceed Table Label Picture Description QTY A Table Top 1 B Shelf 1 C Table Leg 4 Page 1 OF 5
Label Picture Description QTY ① Allen Key 1 ② Bolt (M6*20mm) 9 ③ Bolt (M6*25mm) 9 ④ Washer 17 Before Beginning Assembly: Overview Table Top (A) Shelf (B) Table Leg (C) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Platform Open the carton and place all the parts onto a clean, non-marring surface. Place the Shelf(B) onto a platform, as shown in picture above. Step 2 B Align the Table Leg(C) with mounting positions of Shelf(B) as shown above. Attach Table Leg(C) to Shelf(B) using Bolts(③), and Washers(④) with Allen Key(①). Do not fully tighten the Bolts. Step 3 B Attach Table Legs(C) to Shelf(B) using Bolts(③), and Washers(④) with Allen Key(①).
Step 4 Carefully place Table Top(A) facedown on a clean, non-marring surface. Align the Table Legs(C) to mounting positions on Table Top(A). Attach Table Legs(C) to Table Top(A) using Bolts(②), and Washers(④) with Allen Key(①). Do not fully tighten the Bolts. Step 5 Now proceed to tighten all Bolts at all joints. When tightening the Bolts, tighten sequentially. Place the Table on a LEVEL SURFACE to check for wobbles.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
