Assembly Instructions

1. Prepare 2 bolt assemblies by first inserting
a lock washer (#D) onto the bolt (#B) then
a flat washer (#E) onto that same bolt (#B).
2. Insert a wood dowel (#G) into the center
hole along the backrest w/legs (#1), then
place the seat (#2) onto that wood dowel.
3. Align the holes and
insert the bolts from
within the seat (#2).
Secure using the
Allen wrench (#F).
1. Prepare 4 bolt assemblies by first
inserting a lock washer (#D) onto
the bolt (#A) then a flat washer
(#E) onto that same bolt (#A).
2. Insert 2 bolt assemblies into
each back corner. Secure
using the Allen wrench (#F).