Assembly Instructions

ASSEMBLY INSTRUCTIONS

LED MODULE

POST FITTER SCREW

GROUND WIRE

WIRE CONNECTOR

POWER SUPPLY WIRE

MOUNTING POST

POST CUP

READ & SAVE

INSTALLATION & OPERATION INSTRUCTIONS

TOOLS & MATERIALS REQUIRED

Screwdriver Wire Cutters

Adjustable Wrench Wiring Supplies

CAUTION

Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have

electrical wiring experience, refer to a do-it-yourself wiring handbook or have your

fixture installed by a qualified licensed electrician.

GENERAL

1. Be sure to read these instructions and review the diagrams thoroughly before

beginning.

2. Electrical connections must be in accordance with local codes, ordinances, or the

National Electric Code. If you are unfamiliar with methods of installing electrical wiring,

secure the services of a qualified licensed electrician.

PAGE 1
ASSEMBLY INSTRUCTIONS LED MODULE POST CUP POST FITTER SCREW GROUND WIRE WIRE CONNECTOR POWER SUPPLY WIRE MOUNTING POST READ & SAVE INSTALLATION & OPERATION INSTRUCTIONS TOOLS & MATERIALS REQUIRED Screwdriver Wire Cutters Adjustable Wrench Wiring Supplies CAUTION Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have electrical wiring experience, refer to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician. GENERAL 1.
PAGE 2
3. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing appropriate fuse at fuse box. Turning the power off at the light switch is not sufficient to prevent electrical shock. PREPARE THE FIXTURE NOTE: First turn off electricity FINAL ASSEMBLY 1. Pull the black, white and ground wires out of mounting post. 2. While supporting the fixture, connect electrical wires.
PAGE 3
Please observe local building/electrical codes regarding the installation of your post fixture. Please keep in mind your geographic location and the depth that the ground freezes to, when deciding the depth of your installation.