Installation & Assembly

Turn the table right side up on a LEVEL SURFACE.Check for stability and ensure all bolts are
fully locked.
If the Table wobbles, adjust the Levelers on the bottom of the Legs to make it level.
Step 1
Place and position Table Leg to Table Top as shown in the above picture.
Align the holes on the Table Leg( B) with the holes on the Support Bar of the Table Top(
A).Affix the Leg(B) to theTable Top(A) by using Washer (②) & Bolt(③) with Allen Key (①).
DO NOT FULLY TIGHTEN ALL BOLTS.
Step 2
Align the holes in the Table Legs Support Panels( C)with the holes on the Table Leg(B). Affix
the panels to the legs by using Washer (②) & Screw(③) with Allen Key (①).
Repeat the same steps to affix the other Table Legs Support Panels.
DO NOT FULLY TIGHTEN ALL BOLTS.
Step 3
3 OF 4